The tape making machine is the development direction of the world loom, and the development of the technological revolution
The narrow fabric weaving loom can best meet the development trend of the weaving process, so the needle loom is the development direction of the world loom. From the development trend of weaving machines, breakthroughs have been made in key technologies and links, such as:
Beating: From the beginning, the crank link beating and the conjugate cam beating were used. The rapier loom began to use the crank link to beat the weft.
Since this is not suitable for high-speed operation, it will turn to conjugate cam beating afterwards. Conjugate cam beating has not been in the past 10 years
There are special improvements, but they are more precise in design and manufacture, and more suitable for high-speed operation. It can be said that conjugate cam beating
It is very mature, it is widely used in high-speed rapier, gripper, and air jet loom, and the effect is very good.
The shuttleless looms are still mechanically delivered by the traditional shuttle looms at the beginning, and there are many looms in the past 10 years.
The manufacturer changed the electronic delivery to the standard supply via purchase. Two sets of independent electronic transmissions on the left and right sides are also arranged on the extra wide loom.
By means, the mechanical differential micro motion is eliminated to adjust the tension of the two weaving shafts. There are almost no high-end fabric looms that are not equipped with electronic delivery.