Categories
Contact Us
Add: Changjiang Road, Chao Tian Industrial Zone, Shilou Town, Panyu District, Guangzhou, Guangdong, China.
Tel: +86-20-34897728
Fax: +86-20-34897738
Mob: +8613316227528
E-mail: yjtrade3@yongjinjixie.com
Knowledge
Home > Knowledge > Content
Warping Machine Technical Operation Procedures
Jul 26, 2018

1. The operator checks the operation of each part before the formal operation and does a good job of daily inspection.

2. Clean the sanitation of the tensioner, the yarn guide hook, the yarn guide, etc., and stick the cleaned yarn with the rubber strip to avoid flying feathers.

3. The process requirements should be clearly observed before work.

4. Before running the machine, check whether the warping machine meets the technical requirements of the operation. After the requirements are met, the machine can be started and turned on. Warping machine technical operation requirements:

4.1 Check if the power is turned on;

4.2 Check the auxiliary equipment: whether the tension piece, the carding needle, the rolling roll, the reversing car, the circlip, etc. are complete and not malfunctioning;

4.3 Check whether the emergency brake device is complete and not malfunctioning;

4.4 Check whether each revolution table is flexible; whether the electrostatic device is in normal operation and meets the assembly requirements;

5. If you see the lack of cheese before driving, you need to add the same number of similar yarns. 5 push the same size of the tray;

6. Pay attention to the upper plate: the hook should be hooked and locked, check whether the pressure roller is pressed firmly to avoid the loose disk, causing quality accident or abnormality.

7. Maintenance workers and car-stop workers should be familiar with and understand the technical operation requirements of the varieties opened by this machine.

8. When replacing the tensioner or other warping parts, first disassemble and assemble.

9. Always check the white oil (usually three days), if you want to refuel in time under the warning line.

10. When you start menstruation, pay attention to shaking the door to avoid flare or concave.

11. The sanding of the woolen plate is usually sanded to prevent the yarn from appearing on the edge of the door.


  • Newsletter
  • Categories
  • Contact Us
    Add: Changjiang Road, Chao Tian Industrial Zone, Shilou Town, Panyu District, Guangzhou, Guangdong, China.
    Tel: +86-20-34897728
    Fax: +86-20-34897738
    Mob: +8613316227528
    E-mail: yjtrade3@yongjinjixie.com
  • QR Code
  • Copyright © Guangzhou YongJin Machinery Co.,Ltd All Rights Reserved.